Precision Roller Leveling for Thin Coil
A precision roller leveler flattens thin coil for high-speed stamping. The Jingcui DL Series handles material from 0.1 to 0.6 mm. It delivers a flat, stable strip for demanding 3C electronics parts.
This dual stage leveler uses two roller groups. A rough group and a fine group work in one pass for superior flatness. This corrective roller leveling removes coil curvature cleanly.
What Is a Precision Roller Leveler?
A precision roller leveler removes coil curvature and residual stress from thin stock. It passes the strip through offset rollers that apply reverse bending. The load releases gradually for a consistent, flat band.
The DL Series adds a second fine-leveling group. Compared with a single-stage machine, it achieves better flatness and higher speed on thin material.
การใช้งาน
- High-speed, high-precision leveling of thin coil
- 3C electronics, phone and PC accessory stamping
- Terminals, shielding covers, and motor lamination stamping
- การปรับระดับแถบทองแดง อลูมิเนียม สแตนเลส และเหล็กชุบสังกะสีบาง
- Leveling strip for งานปั๊มโลหะเครื่องใช้ไฟฟ้า and motor lamination blanks
รุ่นและขนาด
| รุ่น | Max Width | ความหนาวัสดุ | มอเตอร์ |
|---|---|---|---|
| DL-100 | 100 mm | 0.1–0.6 mm | 1/2 แรงม้า |
| DL-200 | 200 มม. | 0.1–0.6 mm | 1 HP |
| DL-300 | 300 มม. | 0.1–0.6 mm | 2 แรงม้า |
ข้อมูลทางเทคนิค
| ประเภทเครื่อง | Dual-stage high-precision straightener (rough + fine) |
|---|---|
| ความหนาวัสดุ | 0.1–0.6 mm |
| ความกว้างวัสดุ | 100–300 mm (by model) |
| Roller arrangement | Ø20 mm, 2/3 + 3/10 (up/down, two groups) |
| Adjustment | Four-point independent |
| Leveling speed | 0–16 m/min |
| Feeding direction | Left → right |
| แรงดันไฟฟ้า | AC 220V / 380V / 415V / 440V |
คุณสมบัติเด่น
Two-Stage Straightening
No mid-run re-adjustment is needed. Flatness stays consistent from head to tail during straightening.
Oil-Free Bearings
Roller journal bearings need no lubrication. They resist wear and produce no oil or grease contamination.
VFD-Synchronized Drive
A frequency converter drives the leveler in sync with press speed. This keeps feeding steady and smooth.
Four-Point Independent Adjustment
Operators set the straightening gap precisely. Independent four-point control enables accurate roller adjustment.
Multi-Voltage Support
The precision roller leveler accepts AC 220V, 380V, 415V, and 440V. It suits different regional power supplies.
การประกอบระบบสายการผลิต
The DL precision roller leveler works within your เครื่องยืดตรง lineup. Combine it with a servo feeder for precise, synchronized thin-strip feeding.
คำถามที่พบบ่อย
What thickness does this precision roller leveler handle?
It handles 0.1 to 0.6 mm thin coil. The width ranges from 100 to 300 mm by model.
What does dual-stage straightening mean?
Two roller groups work in one pass. A rough group levels first, then a fine group refines the strip for superior flatness.
Does it need bearing lubrication?
No. The roller bearings are oil-free and maintenance-free. They create no oil or grease contamination.
What voltages does it support?
It supports AC 220V, 380V, 415V, and 440V for different regional grids.
ขอใบเสนอราคา
Tell us your material thickness, width, and required flatness. We will match the right precision roller leveler to your stamping line. ติดต่อ Jingcui วันนี้.
English
Русский
ไทย
Tiếng Việt
Español de México
العربية
ใส่ความเห็น