What Is a Blank Feeder?
A blank feeder automatically loads flat sheet blanks into a stamping press, then unloads and stacks finished parts. The PC-350 handles the full cycle from loading to stacking without manual handling.
It uses three-axis servo linkage and vacuum suction cups to pick single sheets. A touchscreen and PLC control the entire sequence.
Applications
- Blank loading and stamping automation
- Sheet blank feeding for presses
- Automatic part stacking and destacking
- Stamping industry technological upgrading
- Appliance sheet metal stamping — appliance metal stamping
Models & Sizes
| Model | PC-350 |
| Physical dimension | 2500 × 1700 × 2500 mm |
| Max workpiece | 1500 × 350 × 12 mm |
| Feeding stroke | 3000 mm (customizable) |
Technical Specifications
| Linkage axes | Three-axis servo |
| Drive | Servo drive |
| Grasping | Vacuum chuck |
| Cycle time | ~6 s |
| Motor power | 380 V, 0.75 kW × 3 |
Key Features
Full-Process Automation
Loading, feeding, stamping, receiving and stacking run in one continuous sequence.
3-Axis Servo Linkage
Independent servo drive on left-right, lifting and forward-backward axes gives precise positioning.
Vacuum Pickup
Suction cups grasp single sheets steadily, suited to both bar and sheet blank stamping.
Line Integration
Add a decoiler or straightener upstream to feed coil to the press. For coil stock, see our servo NC feeders. Combine with a handling robot for full-line automation.
FAQ
What materials does a blank feeder handle?
The PC-350 loads metal and non-metal sheet blanks for stamping.
Does it separate double blanks?
Vacuum suction picks single sheets; confirm double-blank separation with our team.
What is the cycle time?
A pick-to-feed-to-die cycle takes about 6 seconds.
Request a Quote
Contact for pricing and a custom configuration of the PC-350 blank feeder.
Leave a Reply