JingCui
Showing 1–16 of 29 results
AF Series Pneumatic Air Feeder
Economical pneumatic air feeder for presses. Feed widths 50–450 mm, up to 200 strokes/min — the budget-friendly alternative to NC servo feeders.
Automatic Blank Feeder for Stamping Press (PC-350)
PLC-controlled blank feeder for automatic sheet loading, feeding, stamping and stacking. High-precision guide rails and 3-axis servo linkage for bar blanks.
BTL Series Thick-Plate Straightener Machine
Thick-plate straightener for medium-to-thick coil, 1.0–6.0 mm. Offset rollers remove coil-set for a flat, stable strip before stamping.
CL Series Coil Cradle Straightener Machine
2-in-1 coil cradle straightener combining decoiling and straightening in one station. Widths 150–400 mm, thickness 0.35–3.2 mm.
CR-100 Light Duty Decoiler
Compact light-duty decoiler for thin, light coil (≤160 mm width, ≤100 kg). Low-inertia payoff protects soft strip for precision stamping.
DL Series Dual-Stage High-Precision Thin-Plate Straightener
Dual-stage precision roller leveler for thin coil, 0.1–0.6 mm. Rough + fine roller groups deliver superior flatness for 3C electronics stamping.
GS Series Large Flat Sheet Clamp Feeder (for Presses)
Servo-driven sheet clamp feeder for press automation. Grips large flat sheets 800×2000 to 1500×4500 mm, ±0.5 mm feeding accuracy.
GS Series Large Flat Sheet Clamp Feeder (for Shearing Machines)
Servo-driven sheet clamp feeder for shearing machines. Feeds large flat sheets 800×2000 to 1500×4500 mm with ±0.5 mm accuracy.
Heavy Duty Recoiler (Material Rack)
Heavy-duty recoiler for rewinding scrap or finished strip. Load custom up to 15 tons, width up to 1600 mm, pneumatic pressing arm included.
JRS Series S-Type / U-Type High-Speed Straightener (Steel Loop Feeding)
High-speed loop straightener for motor lamination stamping, 0.1–1.0 mm. S/U-loop buffer syncs decoiling and feeding up to 60 m/min.
JT-330 Intelligent Vision Servo Feeder
Vision servo feeder that recognizes blank contours for automatic stamping — no manual programming, up to 180 strokes/min, material 0.5–4 mm.
MT Series Heavy Duty Material Rack (Decoiler)
Heavy-duty decoiler/material rack for the head of stamping lines. Widths 200–1600 mm, coil weights 1000–3000 kg.
MT-100 Automatic Material Rack
Light-duty decoiler/material rack for thin coil (≤160 mm width, ≤150 kg). Compact cross-bar-free design for precision stamping lines.
MTD Series Double Head Decoiler (Material Rack)
Double-head decoiler for non-stop coil changeover. Widths 200–600 mm, dual-side capacity 300×2 to 2000×2 kg.
NC Servo Roll Feeder with Pneumatic Release (NCF Series)
NC servo roll feeder with pneumatic electronic release for press automation. Coil widths 100–1300 mm, ±0.03 mm accuracy, feeding length up to 9999.99 mm.
NCF Series Zigzag Servo Feeder
Servo zigzag feeder for circle blanking — nests round blanks left-right on the strip to save material. Widths 100–1300 mm, ±0.03 mm feeding accuracy.
