Save Floor Space with a Combined Unit
A 2-in-1 decoiler straightener merges coil payoff and leveling into one machine. The Jingcui UL Series supports the coil on a manual expansion mandrel. It then levels the strip in a single pass.
This combined decoiler leveler removes a separate decoiler from your line. It gives you a flat, stable band for downstream feeding and stamping.
What Is a 2-in-1 Decoiler Straightener?
A 2-in-1 decoiler straightener performs two functions at one station. The cradle holds and pays off the coil while the rollers flatten it. Combining these steps saves space and shortens setup.
The UL Series covers 200 to 600 mm material width. Standard models handle 0.35 to 2.7 mm thickness. Reinforced A models extend to 3.2 mm for heavier stock.
التطبيقات
- Coil decoiling and straightening before continuous stamping
- قطع ختم العُدد
- Home appliance and electronics stamping
- Automotive hardware and lighting part production
- Combined decoiling and leveling for خطوط ختم معادن الأجهزة المنزلية
الطرازات والأحجام
| الطراز | Material Width | Thickness (Std / A) | Motor (Std / A) | Coil Weight (Std / A) |
|---|---|---|---|---|
| UL-200 / UL-200A | 200 mm | 0.35–2.7 / 0.35–3.2 mm | 1 / 2 HP | 1000 / 2000 kg |
| UL-300 / UL-300A | 300 مم | 0.35–2.7 / 0.35–3.2 mm | 2 / 3 HP | 1000 / 2000 kg |
| UL-400 / UL-400A | 400 mm | 0.35–2.7 / 0.35–3.2 mm | 2 / 3 HP | 1000 / 2000 kg |
| UL-500 / UL-500A | 500 mm | 0.35–2.7 / 0.35–3.2 mm | 2 / 3 HP | 1000 / 3000 kg |
| UL-600 / UL-600A | 600 mm | 0.35–2.7 / 0.35–3.2 mm | 2 / 3 HP | 1000 / 3000 kg |
المواصفات الفنية
| Machine type | 2-in-1 coil cradle & straightener |
|---|---|
| سمك المادة | 0.35–3.2 mm (standard ≤2.7 mm) |
| Material width | 200–600 mm (by model) |
| Straightening speed | 15 m/min |
| قدرة المحرك | 1–3 HP (by model) |
| Coil inner diameter | 450–530 mm |
| Coil outer diameter | 1300 mm |
| Coil weight capacity | 1000–3000 kg (by model) |
| Expansion | Manual |
المزايا الرئيسية
Space-Saving 2-in-1 Design
Decoiling and straightening share one compact unit. This 2-in-1 decoiler straightener reduces floor space and process steps.
Reverse-Bending Straightening
Rollers remove coil curvature and internal stress. The output strip is flat and stable for accurate forming.
Manual Coil Expansion
Simple, reliable cradle expansion keeps operation straightforward. Operators change coils without complex tooling.
Reinforced A Model
The A option extends thickness to 3.2 mm. Higher motor power and coil capacity handle heavier loads.
Standardized Coil Size
Uniform 450–530 mm ID and 1300 mm OD support smooth changeovers and line integration.
تكامل الخط
The UL Series fits inside a full straightener line. Pair it with a servo or NC feeder and a coil handling system to automate your stamping flow.
الأسئلة الشائعة
What does a 2-in-1 decoiler straightener do?
It decoils and levels coil stock in one station. This eliminates a separate decoiler from your production line.
What is the maximum coil weight?
Standard models carry 1000 kg. A models carry up to 3000 kg on the larger widths.
What thickness does it handle?
Standard models handle 0.35 to 2.7 mm. A models extend to 3.2 mm for thicker stock.
How wide is the material range?
It covers 200 to 600 mm across five model sizes.
اطلب عرض سعر
Tell us your coil width, thickness, and weight requirements. We will select the right 2-in-1 decoiler straightener for your line. Contact Jingcui today.
English
Русский
ไทย
Tiếng Việt
Español de México
العربية
اترك تعليقاً