Precision Roller Leveling for Thin Coil
A precision roller leveler flattens thin coil for high-speed stamping. The Jingcui DL Series handles material from 0.1 to 0.6 mm. It delivers a flat, stable strip for demanding 3C electronics parts.
This dual stage leveler uses two roller groups. A rough group and a fine group work in one pass for superior flatness. This corrective roller leveling removes coil curvature cleanly.
ما هو جهاز التسوية بالبكرات الدقيق؟
يزيل جهاز التسوية بالبكرات الدقيق انحناء اللفة والإجهاد المتبقي من الخامة الرقيقة. يمرر الشريط عبر بكرات متباعدة تطبق ثنياً عكسياً. يتحرر الحمل تدريجياً للحصول على شريط مسطح ومتجانس.
تضيف سلسلة DL مجموعة تسوية دقيقة ثانية. وبالمقارنة مع الآلة أحادية المرحلة، تحقق تسطيحاً أفضل وسرعة أعلى على الخامة الرقيقة.
التطبيقات
- High-speed, high-precision leveling of thin coil
- 3C electronics, phone and PC accessory stamping
- Terminals, shielding covers, and motor lamination stamping
- Thin copper, aluminum, stainless steel, and galvanized strip leveling
- Leveling strip for خطوط ختم معادن الأجهزة المنزلية and motor lamination blanks
الطرازات والأحجام
| الطراز | Max Width | Material Thickness | Motor |
|---|---|---|---|
| DL-100 | 100 mm | 0.1–0.6 mm | 1/2 HP |
| DL-200 | 200 mm | 0.1–0.6 mm | 1 HP |
| DL-300 | 300 مم | 0.1–0.6 mm | 2 HP |
المواصفات الفنية
| Machine type | Dual-stage high-precision straightener (rough + fine) |
|---|---|
| سمك المادة | 0.1–0.6 mm |
| Material width | 100–300 mm (by model) |
| Roller arrangement | Ø20 mm, 2/3 + 3/10 (up/down, two groups) |
| Adjustment | Four-point independent |
| Leveling speed | 0–16 m/min |
| Feeding direction | Left → right |
| Voltage | AC 220V / 380V / 415V / 440V |
المزايا الرئيسية
Two-Stage Straightening
No mid-run re-adjustment is needed. Flatness stays consistent from head to tail during straightening.
Oil-Free Bearings
Roller journal bearings need no lubrication. They resist wear and produce no oil or grease contamination.
VFD-Synchronized Drive
A frequency converter drives the leveler in sync with press speed. This keeps feeding steady and smooth.
Four-Point Independent Adjustment
Operators set the straightening gap precisely. Independent four-point control enables accurate roller adjustment.
Multi-Voltage Support
The precision roller leveler accepts AC 220V, 380V, 415V, and 440V. It suits different regional power supplies.
تكامل الخط
The DL precision roller leveler works within your straightener machine lineup. Combine it with a servo feeder for precise, synchronized thin-strip feeding.
الأسئلة الشائعة
What thickness does this precision roller leveler handle?
It handles 0.1 to 0.6 mm thin coil. The width ranges from 100 to 300 mm by model.
What does dual-stage straightening mean?
Two roller groups work in one pass. A rough group levels first, then a fine group refines the strip for superior flatness.
Does it need bearing lubrication?
No. The roller bearings are oil-free and maintenance-free. They create no oil or grease contamination.
What voltages does it support?
It supports AC 220V, 380V, 415V, and 440V for different regional grids.
اطلب عرض سعر
Tell us your material thickness, width, and required flatness. We will match the right precision roller leveler to your stamping line. Contact Jingcui today.
English
Русский
ไทย
Tiếng Việt
Español de México
العربية
اترك تعليقاً