NCF Series Zigzag Servo Feeder for Circle Blanking

Zigzag servo feeder — the Jingcui NCF Series combines a servo roller feeder with an independent oscillating box for X-axis (left-right) lateral shift, nesting round blanks on the strip to save material in circle blanking, while closed-loop servo control holds feeding accuracy within ±0.03mm.

What Is a Zigzag Servo Feeder?

A zigzag servo feeder builds on a standard NC servo roller feeder. The roller feeder advances the coil strip forward as usual. An add-on oscillating box — a caterpillar/track traverse plus a drive (power) electrical box — then shifts the strip laterally (X-axis, left to right) to nest round blanks in a staggered layout.

This lateral (X-axis) oscillation is what separates a zigzag feeder from a standard NC servo roll feeder. Instead of laying round blanks in a single straight line, the machine offsets each row so blanks interlock. As a result, you blank more parts from the same coil and throw away less scrap. Exact saving depends on blank diameter and layout.

Note: the oscillating-box specifications (traverse stroke, swing amplitude, drive power, and saving rate) are pending factory confirmation.

Industrial hydraulic power pack with a blue cover connected to a beige control cabinet on wheels in a warehouse setting. — NCF-200 Zigzag Servo Feeder | Save Material on Small Round Blanking

NCF-200 Zigzag Servo Feeder | Save Material on Small Round Blanking

Applications: Where Zigzag Feeding Pays Off

The NCF Series is built for circle blanking and round-part stamping. Typical workpieces include:

Motor stators and rotors
Compressor shells for refrigerators and air conditioners — see our appliance metal stamping page
Clutch discs and brake pads
Pulley blanks and wheel parts
Cookware, lamp covers, and stainless tableware blanks

Which industries run these parts? Electric motors and electronics, home appliances, automotive, lighting, and hardware. For example, an appliance maker blanking compressor shells can cut material cost noticeably with a nested layout.

Zigzag Servo Feeder Models & Sizes

Model	Material Width (mm)	Max Feed Length (mm)	Servo Motor
NCF-100 / NFC-100A	100	9999.99	AC 0.8 kW
NCF-200 / NFC-200A	200	9999.99	AC 1.5 kW
NCF-300 / NFC-300A	300	9999.99	AC 1.5 kW
NCF-400 / NFC-400A	400	9999.99	AC 2 kW
NCF-500 / NFC-500A	500	9999.99	AC 2 kW
NCF-600 / NFC-600A	600	9999.99	AC 2 kW
NCF-700 / NFC-700A	700	9999.99	AC 2.6 kW
NCF-800 / NFC-800A	800	9999.99	AC 2.6 kW
NCF-1000 / NFC-1000A	1000	9999.99	AC 3 kW
NCF-1300 / NFC-1300A	1300	9999.99	AC 3 kW

Two thickness grades are available. The standard NCF version handles 0–3.2mm material, while the “A” version (NFC-xA) handles 0–4.5mm. Both use 2.0mm as standard thickness; all other parameters are identical. Non-standard sizes can be customized.

NCF-500 Zigzag Feeder | 500mm Wide Circle Blanking, 7–22% Material Saved

Technical Specifications

Material width	100–1300 mm (by model)
Material thickness	Standard 0–3.2 mm · “A” 0–4.5 mm (std. 2.0 mm)
Max feed length	9999.99 mm
Feeding accuracy	±0.03 mm (per factory spec)
Feeding mode	Roller feeding + X-axis (lateral) oscillation via add-on oscillating box
Voltage	220V/1/50Hz (≤300) · 380V/415V 3-phase (≥400)
Feeding height	70–170 mm (≤600) · 90–190 mm (≥700)
Release device	Pneumatic electronic release

Why Choose Our Zigzag Servo Feeder

Save Material Through Lateral Oscillation

Lateral (X-axis) oscillation nests round blanks on the strip, cutting the scrap between parts. So the same coil yields more finished blanks, which lowers your per-part material cost.

High-Precision Closed-Loop Feeding

Computer closed-loop feedback keeps accuracy within ±0.03mm. Therefore, your blank layout stays accurate over long production runs.

Programmable Multi-Stage Feeding

Enter up to 20 feed-length groups with 999 strokes each (optional), plus 3-stage manual speed for precise material positioning into the die.

Durable Feed Mechanism

Hollow, HR60° hard-chrome-plated rollers are lightweight with low inertia, so they resist wear and hold up under continuous stamping.

NCF-800 Zigzag Servo Feeder | Balanced Width & Power for Round Blanking

Line Integration

A typical circle blanking line pairs this zigzag servo feeder with an uncoiler and a straightener machine, then feeds into a stamping press and die. Stacking, shearing, and scrap handling are available as options. For straight-line progressive-die jobs, our roller feeder series may be a better fit.

Frequently Asked Questions

What is the difference between a zigzag feeder and a standard NC servo feeder?

A zigzag feeder adds an oscillating box that shifts the strip laterally (X-axis, left-right) to nest round blanks and save material. A standard NC servo feeder moves the strip forward only, which suits progressive-die and linear layouts.

How much material does zigzag feeding save?

The saving depends on blank diameter and layout, and is pending factory confirmation for our oscillating box. Lateral nesting reliably reduces scrap between round blanks versus straight-line feeding.

What width can you supply?

The NCF series covers 100mm to 1300mm material width across ten models. Non-standard widths are available on request.

Can you help with the full circle blanking line?

Yes. We supply the feeder, uncoiler, straightener machine, press interface, and optional stacking or scrap handling as a complete turnkey line.

Request a Quote

Send us your blank diameter, material type and thickness, coil width, and target output. We’ll recommend the right model and layout. Contact us for a quote; DDP or WhatsApp support available.

For technical background, see servo drive technology and EN 10025 structural steel standard.

nc servo feeder

NC Servo Roll Feeder with Pneumatic Release (NCF Series)

NCF Series Zigzag Servo Feeder